Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of STYRON A-TECH™ 1210 - (PS-HI) - Trinseo

Material Data Center offers the following functions for STYRON A-TECH™ 1210:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Styron A-Tech datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Processing/Physical Characteristics - Mechanical properties - Thermal properties - Other properties
Any use of this information falls under the rules of our disclaimer.
Processing/Physical CharacteristicsValueUnitTest Standard
ISO Data
Melt flow index, MFI 3.4 g/10min ISO 1133
Temperature 200 °C -
Load 5 kg -
ASTM Data
Melt Flow Index, MFI 3.4 g/10min ASTM D 1238
Temperature 200 °C -
Load 5 kg -
Mechanical propertiesValueUnitTest Standard
ISO Data
Tensile Modulus 1750 MPa ISO 527
Yield stress 19.5 MPa ISO 527
Stress at break 22 MPa ISO 527
Strain at break 65 % ISO 527
Flexural modulus, 23°C 1950 MPa ISO 178
Flexural strength 38 MPa ISO 178
ASTM Data
Tensile Modulus 1750 MPa ASTM D 638
Tensile Strength at Yield 19.5 MPa ASTM D 638
Tensile Strength at Break 22 MPa ASTM D 638
Elongation at Break 65 % ASTM D 638
Flexural Modulus 1950 MPa ASTM D 790
Flexural Strength 38 MPa ASTM D 790
Thermal propertiesValueUnitTest Standard
ISO Data
Vicat softening temperature, A 98 °C ISO 306
ASTM Data
Vicat Temperature 98 °C ASTM D 1525
Other propertiesValueUnitTest Standard
Density 1040 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Density 1040 kg/m³ ASTM D 792
Characteristics
Processing
Sheet Extrusion, Thermoforming
Special Characteristics
High impact or impact modified
Features
Blending Resin
Certifications
Food contact, Food approval 10/2011, Food approval FDA 21 CFR
Applications
Medical, Packaging
Regional Availability
Europe, Near East/Africa
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.